Handheld Laser Scanner
Aggressive reading performance: over 100 scans/second
Excellent depth-of-field over 47 cm
Wide 42° scan angle for reading wider codes
Datalogic’s patented ‘Green Spot’ for good-read feedback
Supports GS1 DataBar™ linear codes
Multi-interface solutions support most popular interfaces including USB, RS-232, Keyboard Wedge, IBM 46XX and Wand
IP52 Rating: Water and Particulate Sealing
Drop resistance to 1.8 m
?
Hands free Stand | DLGD41BSTD-B | Standard Hands free Stand for Gryphon GD4100, Black |
DLGD41AUTOSTD-B | Smart Hands free Stand for Gryphon GD4100, Black | |
Desk/Wall Holder | DLGD41WHLD-B | Desk/Wall Holder for Gryphon GD4100, Black |
Adaptor | AD-DL5VR | 5V Regulated Power Supply |
Sensor | Laser Engine |
Light source | 630 – 680 nm VLD |
Depth of field | 3.6 to 15.8 cm on 5 mils barcode 2.8 to 35.0 cm on 10 mils barcode Up to 69.0 cm on 20 mils barcode |
Scan rate | 100 Reads/sec |
Print Contrast | 25% or higher |
Pitch Angle | +/- 50º |
Roll (Tilt) Angle | +/- 35º |
Skew (Yaw) Angle | +/- 65º |
Reading Indicators | Good Read LED, “Green spot” on the code, adjustable tone beeper. |
Interface | USB, RS232, Wedge & Wand Multi Interface (GD4330) RS232, IBM 46XX, USB Multi Interface (GD4310) |
Symbologies supported | Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBar Stacked Omni-directional |
Programming method | Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
Input voltage | GD4330 4.75-5.25 VDC GD4310 4.5-14.0 VDC |
Input Current | GD4330: Operating typical 260mA @ 5V GD4310: Operating typical 185mA @ 5V Standby/Idle Typical 30 mA @ 5V |
ESD Protection | 16 kV (Air Discharge) |
Drop Resistance | Withstands repeated drops from 1.8m onto concrete |
Warranty | 5 Year limited Factory Warranty (not on cable) |
Dimensions (H x W x L) | 181 x 71 x 100 mm |
Weight | 169g |