IR Distribution Junction Box with Discrete IR “Linx-IR” (RL-IR305) – resi-linx

“Linx-IR” IR Distribution Junction Box with Discrete IR Only “Foxtel Approved” IR Distribution Module for use in resi-linx® NEW ‘linx-IR’ patented Discrete IR system, with RL-IR505 (Receiver Module and Flat Target). The advantage of Discrete IR control of specific AV devices from each zone, ideal where two of the same AV devices are installed in one area. Works with IQ3 Features Foxtel Approved – works with all Foxtel receivers including IQ2 & IQ3 Compact Distribution Module for use in resi-linx® NEW ‘linx IR’ Discrete Infra Red system with RL-IR505 (Receiver Module and Flat Target), RLIR700 (single) or RL-IR800 (double) Emitters Advantage of Discrete IR control of specific AV devices from each zone. Simply select which device/s you wish to control at each Target zone. Ideal where two of the same AV devices are installed in the same area Ability to distribute to multiple zones with loop wiring configuration using RL-IR505, or with star wiring via RL-IR170 IR Distribution Hub Seven emitter output ports (4 Common, 2 Discrete and 1 Direct), one target input terminal, and one RJ45 socket for expansion Built-in LED to show acknowledgement of IR commands and Power status Includes switch mode power supply and Direct IR Lead Specifications Length: 70mm Width: 40mm Height: 23mm Frequency Range: 20 kHz – 200 kHz Power Input: 12V DC 500mA Switch Mode Power Output Connection: 1.8m Length with F-2.1mm Jack Cable Requirement: UTP Cable Maximum Cable Length: Up to 60 metres Max. Targets per System: Up to 7 Targets