Target Junction Box and Plasma/LCD Target with Discrete Selection (RL-IR505) – resi-linx

Target Junction Box and Plasma/LCD Target with Discrete Selection Only Foxtel Approved Receiver Module for use in resi-linx® NEW ‘linx-IR’ patented Discrete Infra Red system. Advantage of Discrete IR control of specific AV devices from each zone via Dip Switch selection. Easily extendable cable distance by ‘Plug and Play’ facility using RJ45. Built-in LED’s to show acknowledgement of IR commands and Power status. Powered remotely by RL-IR305. Works with IQ3 Features Foxtel Approved – works with all Foxtel receivers including IQ2 & IQ3 Receiver Module for use in resi-linx® NEW ‘linx-IR’ Discrete Infra Red system with RLIR305 (Distribution Module) and RL-IR700 (single) or RL-IR800 (double) Emitter Advantage of Discrete IR control of specific AV devices from each zone via Dip Switch selection Facility for IR control of local AV device/s by connecting RL-IR700/800 Emitter directly to Receiver Module Easily extendable cable distance from Receiver Module by ‘Plug and Play’ facility using RJ45 connector to either Distribution Module or RL-IR170 (IR Distribution Hub) Built-in LED to show acknowledgement of IR commands and Power status Powered remotely by Distribution Module Specifications Length: 70mm Width: 40mm Height: 23mm Frequency Range: 20 kHz – 200 kHz Maximum Cable Length: Up to 60 metres Cable Length Included: 1.75m Max. Targets per System: Up to 7 Targets (inc RL-IR305) Max. Target Reception Distance: Up to 10 metres