Cordless Handheld Linear Imager Scanner
Disinfectant-Ready enclosures treated with SANITIZED™ anti-microbial additives
Fastest speed-to-read: 325 scans/second
Bluetooth Wireless Technology with up to 30 m range
Point-to-point and multi-point transmission
Two-position cradle with Scan-While-Charging capability
Batch Mode capability (>1200 codes stored in memory)
Datalogic ‘Green Spot’ for good read feedback
User-replaceable and long lasting Lithium-Ion battery
Drop resistance to 1.8 m
Available in Black or White (White only on special order)
?
Charge/Comms Cradle | DLBC4030B-BT | Base Charger for RS232, USB, KBW, Wand Emulation Multi interface, Black? |
Sensor | CCD Solid State |
Light source | Dual LED Array 630-670nm |
Depth of field | 6.0 to 18 cm on 5 mils barcode 3.5 to 30 cm on 7.5 mils barcode 2.0 to 45 cm on 10 mils barcode 3.0 to 60 cm on 13 mils barcode 3.0 to 80 cm on 20 mils barcode |
Scan rate | 325 Reads/sec |
Resolution | Max. 0.076mm/3 mils |
Print Contrast | 15% or higher |
Pitch Angle | +/- 65º |
Roll (Tilt) Angle | +/- 35º |
Skew (Yaw) Angle | +/- 65º |
Reading Indicators | Good Read LED, “Green spot” on the code, adjustable tone beeper. |
Cradle Indicators | Battery charging (Red) Charge completed (Green) Power/Data (Yellow) |
Symbologies supported | Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBarStacked Omni-directional |
Bluetooth | Bluetooth 2.0 Certified Class 2 Radio Frequency 2.4 GHz Radio Range (open air) 30m |
Battery | Type: Li-Ion 2100mAh Charge Time: 4 Hours Reads per Charge: 33,000 |
Interface | USB, RS232, Wedge & Wand Multi Interface (BC4030HC) |
Programming method | Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
Input voltage | 4.5-14.0 VDC |
Input Current | Charging (typical) < 8 W Operating typical 2.5 W @ 5V Standby/Idle Typical 2.5 mA @ 5V |
ESD Protection | 16 kV (Air Discharge) |
Drop Resistance | Withstands repeated drops from 1.8m onto concrete |
Sealing | IP52 |
Humidity | 0 ~ 90% non condensing |
Operating Temp. | 0 ~ 50°C |
Warranty | 3 Year limited Factory Warranty (not on cable) |
Dimensions (H x W x L) | Reader 181 x 71 x 100 mm Cradle 186 x 99 x 56 mm |
Weight | Cradle: 246g Reader: 169g |