ONE field terminated RJ45 Connector tool-less plug/male (P1R45M-C6AS) – Kordz

ONE RJ45 CAT6A SHIELDED SITE TERMINATION CONNECTORS The Kordz Category 6a Shielded Field Termination RJ45 Connector offers easy, toolless termination and complies fully with ISO/IEC 11801 2.2 Edition Category 6a and ANSI/TIA-568-C.2 Category 6A standards for applications up to 10GBase-T Ethernet and frequencies up to 500Mhz. It offers a fully shielded brass nickel plated base, bronze nickel plated cover and gold plated phosphor bronze contact pins. Suitable for cable diameters between 6 and 8.5mm, whilst the strain relief is provided by the compression nut on the back of the connector. IDC termination accepts wire guages 22~26AWG. Two different wire managers are provided, one for 22~23AWG wires and the other for 24~26AWG wires. The connector is IP20 rated and 360º degrees shielding for greater tolerances to EMI/EMC. Designed and engineered for site termination and installation ease. TECHNICAL SPECIFICATIONS Performance category: CAT6a Applications standard: ANSI/TIA-568-C.2, IEC 60603-7-51, ISO/IEC 11801 2.2 Edition, CENELEC 50173-1:2011 Application support : 10Base-T to 10GBase-T Housing material: Polycarbonate(PC) UL flammability rating: UL94V-0 [RoHS Compliant] Contact type: Three prong for solid/stranded wires Contact material: Gold over Nickel plating Contact plating: Gold Plating 50μ [1.27μm] Housing colour: White connector / Black outer case Shield type: Shielded Wire-Holder: PBT+10% GF Plug-Contact: T=0.35mm Phosphor Bronze Contact Area: Gold over Nickel Plating IDC Contact: T=0.4mm Phospur Bronze, Sn over Nickel Plating Shielded Base: T=0.5mm Brass, Nickel Plating Shielded Cover: T=0.3mm Phosphor Bronze, Nickel Plating Operating temperature: -40ᴼ to 70ᴼC Current rating: 1.5Amps Dielectric withstanding voltage: 1000Volts AC RMS 60Hz, 1 minute Contact resistance: ≤ 20mΩ @ 100mA max. 50mV max. Insulation resistance: ≥ 500MΩ @500V DC Insertion/Extraction cycles: ≥ 1000 mating cycles Cable to Connector Tensile Strength: 9kg (20lbs) (89N) min. Wire gauge min/max: min: 0.92mm Ø, max: 1.28mm Ø Conductor diameter min/max: min: 0.405mm Ø (26AWG), max: 0.641mm Ø (22AWG) Maximum cable jacket diameter: 6.0 – 8.5mm ODØ PACKAGING Packaging type for each connector: PE Bag Items per box: 10 pcs Box size: 150mm[w] x 110mm[d] x 70mm[h] Master carton box: 28 Inner boxes Master carton size: 485mm[w] x 365mm[d] x 230mm[h] RECOMMENDED TOOL Model No: NO TOOL REQUIRED