The DA-500FH is a 4-Channel Class D Power Amplifier featuring lightweight, compact, high power output, and high efficiency.
It delivers 4x 500W per channel using dedicated amplifier stages with seperate switching mode power supplies.
It can be mounted in an EIA Standard 2RU slot.
Product Specification
Power Source | 220 – 240 V AC |
---|---|
Amplification System | Class D |
Power Consumption | 460 W (based on EN standards) 2350 W (rated output 100 V line |
Input | 4 circuits 10 kO XLR-3-31 type connector CH 1 mode ON/OFF switch (ON: CH 1 to All ch |
Rated Output | 4 channels: 500 W × 4 (100 V line M4 screw terminal |
Frequency Response | 50 Hz – 20 kHz (-3 dB |
Total Harmonic Distortion | 0.1 % (1 kHz) 0.3 % (100 Hz – 20 kHz) |
Protection Circuit | Protection against excessive current flow due to overload unusual DC voltage output temperature rise at power amp. heat sink (100 ? (212 ?F) or more) temperature rise at power supply heat sink (80 ? (176 ?F) or more) |
S/N Ratio | 100 dB (A-weighted) |
Crosstalk | 70 dB (A-weighted) |
Control/Monitor | Control input: Power ON/OFF status of the individual channels photocoupler input Monitor output: Power ON/OFF status of the individual channels Protection status of the individual channels photocoupler open collector output control current: 12 mA or less Connector: RJ-45 connector × 2 Connection cable: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Maximum cable distance: 600 m (656.17 yd) |
LED Indicator | Power (blue) × 1 Protect (red) × 4 |
Cooling | Forced air cooling |
Operating Temperature | -10 to +40 C |
Operating Humidity | 90 %RH or less (no condensation) |
Finish | Panel: Aluminum Case: Plated steel sheet |
Dimensions | 482 (W) × 88.4 (H) × 404.2 (D) mm (18.98 × 3.48″ × 15.91) |
Weight | 9 kg (19.84 lb) |
Accessory | Power cord (2 m (6.56 ft)) …1 Rack mounting screw (with washer) …4 |
Warranty | 3 years |