Handheld Linear Imager Scanner
Datalogic ‘Green Spot’ for good read feedback
User replaceable scan window
Two multi-interface options support the most popular interface combinations
Supports GS1 DataBar™ codes
Remote host download functions (Model QD2110)
Water and Particulate Sealing Rating: IP42
Drop resistance to 1.5 m
?
Hands free Stand | DLQD20STAND-B | Standard Hands free Stand for QuickScan I & L, Black |
Window pack | DLQS233WIN | Replacement windows (pack 5) |
Adaptor | AD-DL5VR | 5V Regulated Power Supply? |
Sensor | CCD Solid State (3648 Pixels) |
Light source | Red LED 610-650nm |
Depth of field | 1.5 to 15 cm on 5 mils barcode 0.8 to 38 cm on 10 mils barcode 2.5 to 65 cm on 20 mils barcode |
Scan rate | 270 Reads/sec |
Resolution | Max. 0.102mm/4 mils |
Print Contrast | 15% or higher |
Pitch Angle | 65º |
Roll (Tilt) Angle | 35º |
Skew (Yaw) Angle | 65º |
Reading Indicators | Datalogic ‘Green spot’ good read, adjustable tone beeper, Good read LED |
Interface | USB, RS232, Wedge & Wand Multi Interface (QD2130) RS232, IBM 46XX, USB Multi Interface (QD2110) |
Symbologies supported | Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBarStacked Omni-directional |
Programming method | Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
Input voltage | QD2130 5 VDC +/-10% QD2110 4.0-14.0 VDC |
Input Current | Operating typical 340mA @ 5V Standby/Idle Typical 190 mA @ 5V |
ESD Protection | 20 kV (Air Discharge) |
Drop Resistance | Withstands repeated drops from 1.5m onto concrete |
Warranty | 5 Year limited Factory Warranty (not on cable) |
Dimensions (H x W x L) | 170 x 71 x 66 mm |
Weight | 121.9g |