The Draytek Vigor130 is a high speed ADSL2+/VDSL modem with powerful NAT, Firewall and network management functions.
With an Ethernet connection, this low cost modem router supports not only NAT, but also PPPoE/PPPoA relay. It allows completely transparent pass through to a LAN device behind it.
The Vigor130 is an IPv6 ready compact VDSL2 router with ADSL2/2+ compatibility for broadband access. Multi-PVC capability makes triple-play deployment very simple. And its Gigabit Ethernet LAN port allows faster data transmission for devices on the LAN .
VDSL2/ADSL2/2+ Router
Support IPv6 & IPv4 network
Built-in VDSL2 modem for easy Internet access Multi-PVC or Multi-VLAN for triple-play application
1 x 10/100/1000 Base-Tx Gigabit Ethernet LAN port Firewall with URL filtering
ADSL2/2+ & VDSL2
Compliant with ITU-T VDSL2 G.993.2 Compliant with ITU-T G.997.1
Capability Fall back to ADSL2/2+ Standards ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt
ITU-T G.992.3 ADSL2 G.dmt.bis ITU-T G.992.5 ADSL2+
VDSL Band Plan: 997, 998
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a Annex A, Annex B, Annex M, Annex J
Loop diagnostic Mode Compatible with POTS/PSTN Multi-PVC
WAN Protocol DHCP Client Static IP
PPPoE
PPPoA (ADSL2/2+ only) MPoA (RFC1483/2684) PPTP/L2TP (VDSL2 only)
802.1q VLAN Tagging
IP Version
IPv4 IPv6
Tunnel Mode: TSPC, AICCU, 6in4, 6rd Dual Stack: PPP, DHCPv6 Client, Static IPv6
Firewall
Multi-NAT, DMZ Host, Port-redirection and Open Port
MAC Address Filter
SPI (Stateful Packet Inspection) DoS/DDoS Prevention
E-mail Alert and Logging via Syslog Time Schedule Control
VPN Pass-through (IPsec, PPTP, L2TP)
Content Security Management
URL Content Filter:
URL Keyword Filter (White List and Black List) Java Applet, Cookies, Active X, Compressed, Executable, Multimedia File Blocking
Network Feature Router/Bridge Configurable IGMP Proxy V2/V3
DHCP Client/Relay/Server UPnP 100 Sessions
DNS Cache/Proxy Dynamic DNS
NTP Client Static Route RIP v1/v2
Network Management
Web-based User Interface (HTTP/HTTPs) Quick Start Wizard
CLI (Command Line Interface, Telnet/SSH) Administration Access Control Configuration Backup/Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP/FTP/WUI/TR-069 Logging via Syslog
TR-069 Compliance with VigorACS SI SNMP v1/v2c
Hardware Interface
1 x VDSL2/ADSL2/2+ port, RJ-11 (Annex A) or RJ-45 (Annex B)
1 x 10/100/1000 Base-Tx LAN port, RJ-45 1 x Factory Reset Button
VDSL2/ADSL2/2+ Router
- Supports IPv6 & IPv4 networks
- Built-in VDSL2 modem for easy Internet access Multi-PVC or Multi-VLAN for triple-play application
- 1 x 10/100/1000 Base-Tx Gigabit Ethernet LAN port
- Firewall with URL filtering
- PPPoE / PPPoA pass-through
ADSL2/2+ & VDSL2
- Compliant with ITU-T VDSL2 G.993.2 Compliant with ITU-T G.997.1
- Capability Fall back to ADSL2/2+ Standards ANSI T1.413 Issue2
- ITU-T G.992.1 G.dmt
- ITU-T G.992.3 ADSL2 G.dmt.bis ITU-T G.992.5 ADSL2+
- VDSL Band Plan: 997, 998
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a Annex A, Annex B, Annex M, Annex J
- Loop diagnostic Mode Compatible with POTS/PSTN Multi-PVC
WAN Protocol
- DHCP Client Static IP
- PPPoE
- PPPoA (ADSL2/2+ only) MPoA (RFC1483/2684) PPTP/L2TP (VDSL2 only)
- 802.1q VLAN Tagging
Firewall
- Multi-NAT, DMZ Host, Port-redirection and Open Port
- MAC Address Filter
- SPI (Stateful Packet Inspection) DoS/DDoS Prevention
- E-mail Alert and Logging via Syslog Time Schedule Control
- VPN Pass-through (IPsec, PPTP, L2TP)
Content Security Management
- URL Keyword Filter (White List and Black List) Java Applet, Cookies, Active X, Compressed, Executable, Multimedia File Blocking
Network Features
- Router/Bridge Configurable IGMP Proxy V2/V3
- DHCP Client/Relay/Server UPnP 100 Sessions
- DNS Cache/Proxy Dynamic DNS
- NTP Client Static Route RIP v1/v2
Network Management
- Web-based User Interface (HTTP/HTTPs) Quick Start Wizard
- CLI (Command Line Interface, Telnet/SSH) Administration Access Control Configuration Backup/Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP/WUI/TR-069 Logging via Syslog
- TR-069 Compliance with VigorACS SI SNMP v1/v2c
Hardware Interface
- 1 x VDSL2/ADSL2/2+ port, RJ-11 (Annex A) or RJ-45 (Annex B)
- 1 x 10/100/1000 Base-Tx LAN port, RJ-45 1 x Factory Reset Button