The NV-600A is a managed VDSL2 router that leverages the extraordinary bandwidth promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step in the delivery of new high-speed Internet applications in commercial environments. Quick, easy, economical to install and maintain, the NV-600A works over existing copper wire infrastructure. NV-600A is a CPE (Customer Premise Equipment) device.
Netsys NV-600A will allow operators worldwide to compete with cable and satellite operators by offering services such as HDTV, VOD, videoconferencing, high speed Internet access and advanced voice services including VoIP, over a standard copper telephone cable.Netsys NV600A is seen by many operators as an ideal accompaniment to a FTTP rollout, where for instance fiber optic is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.
Note. Not for use on the Chorus / Telecom network.
Features & Benefits
- ADSL backward compatible
- Supports high bandwidth up to 100Mbps symmetric over line ports
- Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, and 30a band profile
- Support 997, 998 band plan
- Support uPnP/PPPoE/PPPoATM/IPv4/IPv6
- Support static routing for IPv4 and IPv6 forwarding
- Support NAT/NAPT
- Support Firewall functions contains Packet filtering, DMZ, Mac Address based filtering, Parental Control, Application based filtering
- Support DHCP Server/DHCP Relay/DHCP Client/DHCPv6 Client/DHCPv6
- Server/DNS/DNS Proxy or Relay/DNSv6 Proxy or Relay/NTP Client/
- HTTP1.1 server
- Support Multicast IP table/IGMP v3 Proxy and Snooping
- Support IEEE 802.1p VLAN Priority and mapping to DSCP
- Supports ATM QoS(ATM Traffic classes)
- Support QoS, Prioritize voice over data
- Supports HTTP/HTTPS(SSL) web management
- Support Firmware update/Remote upgrade
- Support configuration backup and restore
- Support WAN and LAN interfaces packet statistics counters display
- Support ATM layer(Linux infrastructure)
- Provides surge protection
- Supports trellis coding
- Supports IEEE 802.1w RSTP
Specifications:
Standard:
IEEE802.3/802.3u standards
ITU-T G993.2, G993.1. G994.1, G997.1 standards
Physical Interface:
4 x RJ-45 10/100Mbps Ethernet port
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x RJ-11 connector for POTS/ISDN device
1 x console port (RS232C/115200bps)
LED Indicators:
1 x Power LED
4 x Link/Active Status for Ethernet port
1 x Link LED for VDSL2 port
Switch Method:
Sore and Forward
Flow Control:
Full-duplex: IEEE 802.3x
Half-duplex: Back pressure
Power Input:
Input Voltage: 12 VDC
EMC:
EMI Compliant: FCC Class A
EMS Compliant: CE mark
Operating Temperature:
0oC~ 50oC (32oF ~ 122oF)
Storage Temperature:
-20 oC~ 70oC (-4oF ~ 158oF)
Humidity:
10 to 90% (non-condensing)
Dimensions:
184mm x 146mm x 40mm (7.2″ x 5.74″ x 1.57″)
