Designed to be the gateway between Rako transmitter devices and the RAK-4 range of dimmer racks.Can only be configured using the Rako RASOFT PC programming software.?
The RX LINK module allows control of RAK-4 dimmer racks from any RAKOM device via the RJ45 connection. Designed to enable the RAK-4 dimmer racks to be mounted remotely to the lighting loads, RF push button wall plates and other Rako RF accessories. The supplied 1 meter RJ45 patch lead can be replace with longer lengths of standard UTP CAT5 cable, allowing the RX LINK to be located up to 100 meters from the RAK-4 dimmers. Configured using the Rako RASOFT software, the RX LINK can be connected to a stack of four RAK-4 dimmers to provide up to 16 dimming channels.?